- Manufacturer:
- Model:TAD-200SP
- SKU:
- Available:Pre-Order0
Digital pneumatic pipette with vacuum tweezers TAD-200SP - Ban Seok
The TAD-200SP Ban Seok digital dispenser is equipped with a 4-digit 7-segment LED dispensing time indicator. This dispenser has 3 operating modes:
1) Manual - the duration of dosing is determined by the operator, while the indicator displays the dosing time for each dose.
2) Timed - dosing duration is determined by the preset dosing time.
3) Cyclic - is a sequence of doses, the duration of which is limited by the preset value of the timer, and the intervals between doses (pauses). The duration of the pause is set by an analog regulator, which is also equipped with a switch to enable and disable the ability to set a pause.
These properties allow the TAD-200SP dispenser to be used as a stand-alone semi-automated dispensing system for materials such as: solder paste, flux gel, lubricants, adhesives, heat-conducting materials, resins, oils, compounds and other viscous materials.
The supplied Model MN-5 Vacuum Tweezer is designed to safely and conveniently move components around the work area. The vacuum depth for normal operation of the vacuum tweezers is 0.5 MPa. To adjust it, use the regulator located on the front panel of the dispenser, above the connection for the vacuum tweezers. There is a vacuum on / off button on the handle of the vacuum tweezers. To move the component, press and hold the vacuum on / off button, grab and perform the necessary manipulations with the component and release the vacuum on / off button, thus stopping the vacuum supply through the silicone suction cup of the vacuum tweezers.
Properties
- Microprocessor control
- Availability of vacuum tweezers for moving and installing components
- Continuous and metered application
- Vacuum cut-off prevents splashing of the applied material
- Vacuum depth regulator
- Pressure regulator
- Pressure indicator
- Digital LED interface
- 3 operating modes - manual, timed and cyclical
- Pedal control
There is a vacuum on / off button on the handle of the vacuum tweezers. To move the component, press and hold the vacuum on / off button, grab and perform the necessary manipulations with the component and release the vacuum on / off button, thus stopping the vacuum supply through the silicone suction cup of the vacuum tweezers.
Dispenser delivery set TAD–200SP
Name |
Description |
Quantity, pcs. |
TAD–200SP |
Digital dispenser |
1 |
FOOT SWITCH |
Foot switch |
1 |
BA-30/50 |
Cartridge adapter 30/50 ml |
1 |
BA-30/50-O |
Rubber seal for adapter 30/50 ml |
1 |
MN–5 |
Vacuum tweezers |
1 |
Vacuum tweezers delivery set MN-5
Name |
Description |
Quantity, pcs. |
MN–5 |
Vacuum tweezers |
1 |
VPZ-2 |
Curved Suction Cup Needle ø2 mm and ø4 mm |
1 |
VPZ-6 |
Curved Suction Cup Needle ø6 mm and ø8 mm |
1 |
2RS |
Silicone suction cup ø2 mm |
1 |
4RS |
Silicone suction cup ø4 mm |
1 |
6RS |
Silicone suction cup ø6 mm |
1 |
8RS |
Silicone suction cup ø8 mm |
1 |
UL04-2W |
Coiled air hose |
1 |
Operating manual for dispenser TAD-200SP (PDF, ENG)
Characteristics
Parameter |
Value |
Dosing time, sec |
0,01 – 99,99 |
Intervals between doses, sec |
0,01 – 5,99 |
Dosing pressure, kgf / cm² |
0 – 10 |
Vacuum depth mm Hg |
0 ~ -680 |
Power consumption, W |
32 |
Supply voltage |
220 В 50 Hz |
Weight, kg |
6 |